2 DIR3D - 3D File Manager\n\nDIR3D\nDIR3D Files (*.d3d)\n.D3D\nDIR3D.Document\nDIR3D Document
3 DIR3D does not detect a joystick installed on your system. Use the Windows Control Panel to install.
4 DIR3D was not able to capture the joystick, probably because another application is using it. Shut that application down and try again.
5 Unregistered Copy
6 You must enter a name string with at least five characters.
7 You have either misstyped your name or registration code. Make sure that both exactly match the information you received from Regnoc Software.
8 Windows has reported an error in recording your registration information. Ask your system administrator if your computer's registration database is currently protected. If so, the administrator will need to remove protection to allow registration to be completed.
9 Thank you for registering your copy. Save your registration information in case you need to reinstall DIR3D. Note that you can continue to download the latest version of DIR3D. Your registration will continue to apply.
10 Days before demo expires:
11 Expired Copy of DIR3D
12 (Most features are disabled.)
13 Fully Registered Copy
14 DIR3D - 3D File Manager - Regnoc Softare
15 The hidden/system file you have selected will not be displayed unless you change your selection on the File/Display Detail menu item.
16 Warning Message
17 DIR3D was not able to make any network connections. Make sure that your network interface card is connected.
18 Select one of the network drives and then click "OK", or select "Cancel" to exit without connecting to a network drive.
19 DIR3D was not able to make this network connection, either because the link is already in use, disabled, or access is denied.
20 Select a free drive letter to assign to this network connection.
21 The network would not allow this connection to be made - access denied.
22 This connection is already assigned - no reason to establish a second link.
23 The drive letter you have selected is invalid (bad device type.) Select a name like F:
24 The network does not recognize this connection string, possibly because this device just became inactive (bad device.)
25 The network does not recognize this connection string, possibly because this device just became inactive (bad net name.)
26 An error was detected in reading your local profile file (bad profile.)
27 An error was detected in attempting to read your local profile file.
28 DIR3D was not able to open the registration database, possibly because your system has been set up to only allow the system administrator access.
29 Pick a file type in the selection box at top-left, and then select the Remove Type button.
30 Remove File Type
31 Are you sure that you want to remove the following file type from the registration list? ->
32 Your new key could not be added to the registration database. Make sure that your key contains only valid file characters.
33 Select one of the programs in the list. This program will be associated with the file type you have selected at the top.
34 Select a file type to associate with this program. The program will be associated with the type selected in the top-left list.
35 DIR3D was not able to access the Windows Registration Database for this file type, perhaps because the database is locked by your system administrator.
36 The shorthand name should consist of letters and numbers, without spaces. You can use the period and underline characters.
37 Are you sure that you want to remove this program from the list of those registered? The program files will not be deleted, but you will not be able to associate this program with specific file types.
38 Number of color bits per pixel:
39 Number of color planes:
40 Number of device-specific brushes:
41 Number of device-specific pens:
42 Number of device-specific fonts:
43 Number of entries in the device's color table (if used):
44 The color resolution of in bits per pixel:
45 Raster
46 Requires banding support:
47 Supports fonts larger than 64K:
48 Capable of transferring bitmaps:
49 Supports bitmaps greater than 64K:
50 Supports device bitmaps:
51 Supports SetDIBits() and GetDIBits() functions:
52 Supports SetDIBitsToDevice() function:
53 Capable of flood fills:
54 Capable of Windows 2.0 features:
55 Includes state block in the device context:
56 Supports dev opaque and DX array:
57 This is a palette-based device:
58 Can store bitmaps locally:
59 Capable of scaling image:
60 Can do StretchBlt() function:
61 Can do StretchDIBits() function:
62 Curves
63 Supports drawing curves:
64 Supports drawing circles:
65 Supports drawing pie wedges:
66 Supports drawing chords:
67 Supports drawing ellipses:
68 Supports drawing wide borders:
69 Supports drawing wide, styled borders:
70 Supports drawing interiors:
71 Supports drawing rounded rectangles:
72 Lines
73 Supports drawing polylines:
74 Supports markers:
75 Supports polymarkers:
76 Supports drawing wide lines:
77 Supports drawing styled lines:
78 Supports drawing wide styled lines:
79 Supports drawing interiors:
80 Polygons
81 Supports drawing alternate fill polygons:
82 Supports drawing rectangles:
83 Supports drawing winding number fill polygons:
84 Supports drawing scan lines:
85 Text
86 Supports character output precision:
87 Supports stroke output precision:
88 Supports stroke clipping precision:
89 Supports 90 degree character rotation:
90 Supports character rotation by any amount:
91 Supports indepent X,Y scaling:
92 Supports doubling character size:
93 Supports integer multiples of character size:
94 Supports scaling by any amount:
95 Supports creation of italics:
96 Supports creation of underlined characters:
97 Supports creation of strike-out characters:
98 Supports enumeration of raster fonts:
99 Supports enumeration of vector fonts:
100 OLE initialization failed. Make sure that the OLE libraries are the correct version.
101 <<Unknown Format>>
102 Failed to create object. Make sure the object is entered in the system registry.
103 The Open GL 3D library could not be loaded. This probably means that you are running an old version of Windows. Try rebooting your computer before doing anything more serious. You may need to install a new version of Windows.
104 Critical Error
105 %lu KB
106 %lu KB Free on %c:
107 Unavailable
108 ..(To Parent Directory)
109 (No association for this type.)
110 You will need to make an assoication between a program and this file type to lauch the program. Use the File/Associations menu item.
111 Message
112 Error Message
113 Are you sure that you want to delete the selected directory, and all files and subdirectories? This operation cannot be undone.
114 Are you sure that want to delete the currently selected files? This operation cannot be undone.
115 Confirmation Required
116 Your are about to delete a
117 SYSTEM
118 HIDDEN
119 file. Please confirm you wish to delete this file:
120 and
121 DIR3D was not able to delete all of the selected files, either because they are read-only or in use by another program. Use Ctrl-Right Mouse button to check or change the read-only status of any file or directory.
122 Unable to Delete File
123 directory. Please confirm you wish to delete this directory:
124 DIR3D was not able to delete this directory and all of its contents. Check that the directory chain does not contain currently running applications or network resources.
125 DIR3D could not create this directory, either because the name contains invalid charactors, or because the directory already exists.
126 DIR3D cannot rename this file. The file may be in use, or another file by the same name may exist in this directory, or the new name contains characters not supported by the operating system for file names.
127 DIR3D could not change the file attirbutes to those specified, possibly because the opperating system does not allow this change. All values have been reset.
128 Polygons
129 DIR3D could not rename the directory, possibly because this directory name already exists at this level in the directory chain.
130 Supports double weight characters:
131 Supports wide styled borders:
132 Copy Confirmation (turn off in Options menu)
133 Are you sure that you want to copy the selected files to:
134 Move Confirmation (turn off in Options menu)
135 Are you sure that you want to move the selected files to:
136 You need to select a file from the list before any action can take place.
137 DIR3D was not able to delete this entry from your DIR3D.INI file, possibly because that file has been damaged.
138 Thank You!
139 DIR3D was not able to start a second copy of itself.
140 The destination disk does not have room to hold all of the selected data (DOS Disk Full Error.)
141 The operating system would not allow this file name to be used.
142 The destination disk or drive is read-only, so file copy and move operations are not possible.
143 Do you want to stop this copy operation?
144 Do you want to stop this move operation?
146 Are you sure that you want to copy the selected file(s) to the directory under the drop point?
32771 Move towards the left
32780 Return to home position (root.)\nHome
32781 Move towards the right.
32782 Move upwards
32783 Move downward.
32784 Move further into the scene.\nIn
32785 Move out of the scene (backwards.)\nOut
32786 Opens help file on the table of contents page.\nHelp
32789 Reload all of the file details for this disk/network connection.
32790 Rotate view around vertical axis to the left.\nRotate Left
32791 Rotate view around vertical axis to the right.\nRotate Right
32798 Change the colors used to draw the scene.
32799 Change the directory size and space parameters.
32800 Change the scene's lighting
32801 Set the directory floor design.
32802 Sets which file types are visible and which operations require confirmation.
32803 Move back to the last position occupied.\nBack
32804 Change movement amounts
32806 Select which files are displayed in directory details.\nFilter
32807 Delete the currently selected file or directory.\nDelete
32808 Copy the currently selected files.\nCopy
32809 Move the currently selected files to a new drive or directory.\nMove
32810 Change the name of the currently selected file or directory.\nRename
32811 Set file display options and sound effects.
32812 Toggles the sound effects on and off.
32813 Toggles the vertical scroll bar between moving along Y or Z axis.\nV Scroll Y<>Z
32830 Change the drive or network connection viewed.\nDrive
32831 Connect to a network drive.\nConnect
32832 Disconnect from a network drive.\nDisconnect
32833 Clear file details and show only directory boxes.\nPlain
32840 View the list of currently selected files and directories.\nView Selected
32841 Change the order in which files are displayed.
32843 Move to the top of the directory.\nTop
32844 Move to the bottom of the directory.\nBottom
32846 Information on how to order this product.
32847 Create a new directory under the last selected directory.
32848 Locate a file on a drive or network connection.\nFind Files
32849 Find a file on this disk drive.
32850 Toggles joystick control of position on and off.
32851 Calibrates the movement and sensitivity of the joystick.
32852 Enter the registration code you obtained from Regnoc Software.
32854 Notice of limited liability.
32855 Associate a program with a file type (extension.)
32856 Information about navigation in DIR3D
32857 Introductory information about DIR3D.
32860 Select which font to use for directory and file names.
32861 Set options that control display speed and detail.
32862 Start a program running, or modify launch list.
32863 Turn background music option on and off and select .MID song.
32865 Open a second DIR3D window to look at another disk/drive.
57344 DIR3D
57345 Ready
57600 Create a new document\nNew
57601 Open an existing document\nOpen
57602 Close the active document\nClose
57603 Save the active document\nSave
57604 Save the active document with a new name\nSave As
57610 Update the container to show any changes\nUpdate
57611 Save a copy of the active document with a new name\nSave Copy
57616 Open this document
57617 Open this document
57618 Open this document
57619 Open this document
57632 Erase the selection\nErase
57633 Erase everything\nErase All
57634 Copy the selection and put it on the Clipboard\nCopy
57635 Cut the selection and put it on the Clipboard\nCut
57636 Find the specified text\nFind
57637 Insert Clipboard contents\nPaste
57638 Insert Clipboard contents and a link to its source\nPaste Link
57639 Insert Clipboard contents with options\nPaste Special
57640 Repeat the last action\nRepeat
57641 Replace specific text with different text\nReplace
57642 Select the entire document\nSelect All
57643 Undo the last action\nUndo
57644 Redo the previously undone action\nRedo
57653 Split the active window into panes\nSplit
57664 Display program information, version number and copyright\nAbout
57665 Quit the application; prompts to save documents\nExit
57680 Switch to the next window pane\nNext Pane
57681 Switch back to the previous window pane\nPrevious Pane
57856 Insert new embedded object\nNew Object
57857 Edit linked objects\nEdit Links
57858 Convert object to different type\nConvert Object
57872 Activate embedded or linked object
57873 Activate embedded or linked object
57874 Activate embedded or linked object
57875 Activate embedded or linked object
59136 EXT
59137 CAP
59138 NUM
59139 SCRL
59140 OVR
59141 REC
59392 Show or hide the toolbar\nToggle ToolBar
59393 Show or hide the status bar\nToggle StatusBar
61184 Change the window size
61185 Change the window position
61186 Reduce the window to an icon
61187 Enlarge the window to full size
61188 Switch to the next document window
61189 Switch to the previous document window
61190 Close the active window and prompts to save the documents
